Home › BODY › SEAT › FRONT POWER SEAT LUMBAR SWITCH

FRONT POWER SEAT LUMBAR SWITCH > INSPECTION

for Preparation Click here



1. INSPECT FRONT POWER SEAT LUMBAR SWITCH


    B068208E08
  1. Measure the resistance between the terminals when the switch is operated.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    3 (B) - 4 (H)
    HOLD
    Below 1 Ω
    1 (R) - 2 (E2)
    HOLD
    Below 1 Ω
    1 (R) - 2 (E2)
    OFF
    Below 1 Ω
    4 (H) - 5 (E)
    OFF
    Below 1 Ω
    1 (R) - 3 (B)
    RELEASE
    Below 1 Ω
    4 (H) - 5 (E)
    RELEASE
    Below 1 Ω

    If the result is not as specified, replace the switch.