DTC P0604 Internal Control Module Random Access Memory (RAM) Error |
| DTC No. | DTC Detection Condition | Trouble Area |
| P0604 | ECM internal error (1 trip detection logic) | ECM |
| Related DTCs | P0604: ECM RAM error |
| Required Sensors/Components (Main) | ECM |
| Required Sensors/Components (Related) | - |
| Frequency of Operation | Continuous |
| Duration | 6 times |
| MIL Operation | Immediate |
| Sequence of Operation | None |
| The monitor runs whenever following DTCs not present | None |
| RAM mirror check | Fail |
| 1.CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0604) |
Connect the Techstream to the DLC3.
Turn the ignition switch on (IG).
Turn the tester on.
Select the following menu items: Powertrain / Engine and ECT / Trouble Code.
Read the DTCs.
| Display (DTC Output) | Proceed to |
| P0604 | A |
| No output | B |
|
| ||||
| A | ||
| ||