Home › BRAKE › BRAKE CONTROL › VEHICLE STABILITY CONTROL SYSTEM

VEHICLE STABILITY CONTROL SYSTEM > SYSTEM DIAGRAM

for Preparation Click here



C166545E01


C192804E01


Transmitting ECU (Transmitter)
Receiving ECU
Signals
Communication Method
Skid control ECU
Steering angle sensor
Steering angle sensor request signal
CAN communication system
Skid control ECU
Yaw rate and acceleration sensor
Yaw rate and acceleration request signal
CAN communication system
Skid control ECU
ECM
  1. Wheel speed signal
  2. VSC data signal
CAN communication system
ECM
Skid control ECU
  1. Shift position signal
  2. Throttle position signal
  3. Engine revolution signal
  4. Intake air temperature signal
  5. Engine torque request signal
  6. Accelerator pedal position signal
CAN communication system
Skid control ECU
Power steering ECU
Target additional torque signal
CAN communication system
Power steering ECU
Skid control ECU
Electronic power steering cooperative control enabling signal
CAN communication system
Skid control ECU
Combination meter
  1. ABS warning light signal
  2. Brake warning light signal
  3. VSC OFF indicator light signal
  4. TRAC OFF indicator light signal
  5. Slip indicator light signal
  6. Downhill assist control indicator light signal (*1)
  7. Master caution indicator light signal (*2)
  8. Wheel speed signal
CAN communication system
(*1): for 4WD
(*2): Models with multi-information display