Home › TRANSMISSION ยท U151F AUTOMATIC TRANSAXLE › UNDERDRIVE PLANETARY GEAR

UNDERDRIVE PLANETARY GEAR > DISASSEMBLY

for Preparation Click here



1. INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD


    D025593E01
  1. Using SST, secure the underdrive planetary gear assembly.

    SST
    09387-00050  



    D025594E01
  1. Using SST and a torque wrench, measure the turning torque of the underdrive planetary gear assembly while rotating the torque wrench at 60 rpm.

    SST
    09387-00050  

    Turning torque at 60 rpm.:
    0.50 to 1.42 N*m (5.1 to 14.5 kgf*cm, 4.4 to 12.6 in.*lbf)

    HINT:
    Use a torque wrench with a fulcrum length of 160 mm (6.3 in.).



2. REMOVE FRONT PLANETARY GEAR NUT


    D003686E01
  1. Using SST, loosen the staked part of the lock nut.

    SST
    09930-00010   (09931-00010, 09931-00020)
    09387-00050  



    D003687E04
  1. Place the underdrive planetary gear in a soft jaw vise.

    NOTICE:
    Be careful not to damage the differential drive pinion.



    D025609E06
  1. Using a socket wrench, remove the lock nut.



3. REMOVE CYLINDRICAL ROLLER BEARING RACE INNER


    D003689E04
  1. Using SST, remove the cylindrical roller bearing race inner.

    SST
    09950-00020  
    09950-00030  
    09950-60010   (09951-00320, 09957-04010)



4. REMOVE UNDERDRIVE PLANETARY GEAR ASSEMBLY


    D026437E01
  1. Using SST and a press, remove the differential drive pinion, parking lock gear, counter driven gear with underdrive planetary ring gear, and radial ball bearing front.

    SST
    09950-60010   (09951-00320)
    09387-00050  
    09950-00020  
    09950-00030  
    09950-40011   (09957-04010)



    D003691E04
  1. Place the underdrive planetary gear in a soft jaw vise.

  1. Using SST, remove the radial ball bearing rear from the underdrive planetary gear.

    SST
    09950-60010   (09951-00320)
    09950-00030  
    09950-40011   (09957-04010)



5. REMOVE UNDERDRIVE PLANETARY RING GEAR


    D003826E01
  1. Using snap ring pliers, remove the snap ring.



    D003827E08
  1. Remove the underdrive planetary ring gear from the counter driven gear.