Home › SECURITIES › THEFT DETERRENT › THEFT DETERRENT SYSTEM (w/o Smart Key System)

THEFT DETERRENT SYSTEM (w/o Smart Key System) > CUSTOMIZE PARAMETERS


HINT:
The following items can be customized.

NOTICE:
  1. After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
  2. Be sure to record the current settings before customization.
  3. When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the system, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).


CUSTOMIZE
  1. Connect Techstream to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. Turn the tester on.

  4. Enter the following menus:
    Select: Customize Setting /

  5. Select the setting by referring to the table below.


Security: 
Display (Item)
Default
Contents
Setting
Passive Mode (Security System)
OFF
  1. Passive Mode is a function that switches the theft deterrent system from the arming preparation state to the armed state 30 seconds after the key is removed from the key cylinder and all doors, engine hood and luggage compartment door are closed, even if the doors are not locked by wireless or door key lock operation.
  2. In Passive Mode, if the following operations are not performed within 14 seconds after a door is opened during armed state, the theft deterrent system will judge that condition as a theft and switch to the alarm sounding state.
    1. Unlock any door by key or wireless operation
    2. Turn the ignition switch to the ON position
    3. Open the luggage compartment door by key or wireless operation
ON/OFF
Warning by Horn
ON
Function that allows the vehicle horn and theft deterrent horn to be used as warning devices
ON/OFF
Entry Delay
14 s
Function that changes entry delay time (time before warning starts) for Passive Mode
0 s/14 s/30 s
Warning by Glass Broken Sensor
ON
Function that turns the glass breakage sensor on/off. This function is only effective for vehicles with glass breakage sensor.
ON/OFF