Function
| Outline
|
Manual lock and unlock function
| This function can lock or unlock all doors by the door lock control switch operation.
|
Key-linked lock and unlock function
| This function, which is linked with the mechanical key cylinder, can lock or unlock all the doors when a lock or unlock operation is effected.
|
Manual unlock prohibition function
| Performing the door lock operation with an electrical key (*1) or a mechanical key (*2) will prohibit the unlock operation by the door lock control switch.
|
Key lock-in prevention function
| If each door lock (*1) or driver's door lock (*2) operation is performed when the electrical key (*1) or mechanical key (*2) is in the cabin (*1) or ignition key cylinder (*2), all the doors will be unlocked.
|
Shift-linked automatic door lock function
| When the conditions listed below are met consecutively, this function causes all the doors to be automatically locked.
- The ignition switch is on (IG).
- All doors are closed.
- The shift lever is moved out of the P position.
- Any of the doors are unlocked.
|
Shift-linked automatic door unlock function
| When the ignition switch is on (IG), if moving the shift lever to the P position from any other position, all the doors will be automatically unlocked.
|
2-step unlock function
| This function is provided to unlock the driver's door by turning the key cylinder once and to unlock the remaining doors by turning it twice.
|
Speed-sensitive automatic door lock (*3)
| When conditions listed below are all met, this function causes all doors to automatically lock.
- Vehicle speed is higher than approximately 20 km/h (13 mph).
- All doors are closed.
- The shift lever is moved to any position other than P or N.
- Any one of the doors are unlocked.
|
Opening driver's door-linked automatic door unlock (*3)
| All doors are unlocked automatically when the driver's door is opened within 10 seconds after the ignition switch is turned off from on (IG).
|