Warning/Indicator:
Item
| Detail
|
Turn
| Receives a turn signal from the turn signal flasher. (Direct Line)
|
Beam
| Receives a beam indicator light signal from the main body ECU. (CAN (CAN No. 1 Bus))
|
Charge
| Receives a charge indicator light signal from the generator. (Direct Line)
|
MIL (Check engine)
| Receives a check engine warning light signal from the ECM. (Direct Line)
|
Door
| Open door warning light comes on receiving a door condition signal from the main body ECU. (CAN (CAN MS Bus))
|
Driver side seat belt
| Receives a driver side seat belt signal from the center airbag sensor assembly. (CAN (CAN No. 1 Bus))
|
Front passenger side seat belt
| Receives a passenger side seat belt signal from the center airbag sensor assembly and transmits a passenger side seat belt condition signal to the hazard warning switch. (Direct Line)
|
Head (*1)/Tail (*2)
| Receives a head (*1)/(*2) indicator light signal from the main body ECU. (CAN (CAN No. 1 Bus))
|
Front fog
| Receives a front fog indicator light signal from the main body ECU. (CAN (CAN No. 1 Bus))
|
A/T shift
| Receives an A/T shift condition signal from the park / neutral position switch and the ECM. (CAN (CAN No. 1 Bus))
|
A/T oil temperature
| Receives an A/T oil temperature signal from the park / neutral position switch and the ECM. (CAN (CAN No. 1 Bus))
|
Snow
| Receives an ECT snow signal from the park / neutral position switch and the ECM. (CAN (CAN No. 1 Bus))
|
Fuel
| Receives a fuel signal from the fuel sender gauge. (Direct Line)
|
ABS
| Receives an ABS signal from the skid control ECU. (CAN (CAN No. 1 Bus))
|
Slip
| Receives a slip signal from the skid control ECU. (CAN (CAN No. 1 Bus))
|
Brake
| Receives a brake signal from the brake fluid level warning switch (Direct Line) and the skid control ECU. (CAN (CAN No. 1 Bus))
|
Cruise
| Receives a cruise signal from the ECM. (CAN (CAN No. 1 Bus))
|
SRS
| Receives an SRS signal from the center airbag sensor assembly. (CAN (CAN No. 1 Bus))
|
Downhill assist control (*3)
| Receives downhill assist control signal from the skid control ECU. (CAN (CAN No. 1 Bus))
|
Slip off (*4)
| Receives a VSC off signal from the skid control ECU. (CAN (CAN No. 1 Bus)
|
TRAC off
| Receives a TRAC off signal from the skid control ECU. (CAN (CAN No. 1 Bus)
|
EPS
| Receives an EPS signal from the power steering ECU. (CAN (CAN No. 1 Bus))
|
Washer
| Receives an washer signal from the washer level warning switch. (Direct Line)
|
Tire pressure (*4)
| Receives a tire pressure signal from the tire pressure warning ECU. (Direct Line)
|
Master caution indicator light
| Master caution indicator light comes on when the warning display appears or the oil replacement resetting procedure has finished.
|
Oil pressure (*6)
| Receives an oil pressure warning light signal from the oil pressure switch. (Direct Line)
|
Oil replacement (*7)
| An oil replacement reminder light comes on or blinks to remind the driver to change the engine oil depending on the vehicle driving distance.
|
Item
| Detail
|
Cruise information display
| - Average fuel consumption
- Current fuel consumption
- Possible running distance
- Total cruising distance
- Total average fuel consumption
| Five types of information (average fuel consumption, current fuel consumption, possible running distance, total cruising distance since reset, and total average fuel consumption since reset) can be displayed.
|
Warning display
| - Door warning
- Each system warning
| Interrupts the multi-information display immediately when a warning occurs.
|
Air conditioning display
| Interrupts the multi-information display immediately when air conditioning is operated.
|
DTC (Diagnostic Trouble Code) display
| Displays DTCs pertaining to the VSC function.
|