CLOCK SYSTEM > SYSTEM DIAGRAM |
| CAN and direct line signals |
w/o Multi-information Display:

w/ Multi-information Display:

| Input and output signals of the clock assembly |
w/o Multi-information Display:
| Communication Signal | Sender | Receiver | Communication LIne |
| Illumination signal | Combination Meter Assembly | Clock Assembly | Direct Line |
w/ Multi information Display:
| Communication Signal | Sender | Receiver | Communication Line |
| Rheostat duty signal | Combination Meter Assembly |
| CAN (CAN No. 1 Bus) |
| Tail cancel signal |