Home › BODY ELECTRICAL › OTHER SYSTEM › CLOCK SYSTEM

CLOCK SYSTEM > TERMINALS OF ECU

for Preparation Click here



CLOCK ASSEMBLY (w/o Multi-information Display)

HINT:
Measure the voltage with the connector still connected.


E146932E01


Terminal No. (Symbols)
Wiring Color
Terminal Description
Condition
Specified Condition
E20-1 (B) - Body ground
Y - Body ground
Battery
Always
11 to 14 V
E20-2 (E) - Body ground
BR - Body ground
Ground
Always
Below 1 V
E20-3 (ILL+) - Body ground
GR - Body ground
Illumination signal
Ignition switch on (IG), light control switch OFF
Below 1 V
Ignition switch on (IG), light control switch TAIL/HEAD
11 to 14 V
E20-4 (ACC) - Body ground
L - Body ground
Ignition switch signal (Accessory)
Ignition switch off
Below 1 V
Ignition switch on (ACC)
11 to 14 V


    I037750E01
  1. Waveform (Reference): Using oscilloscope:
    Item
    Condition
    Tool setting
    2 V/DIV., 1 ms./DIV.
    Vehicle condition
    Ignition switch on (IG), light control switch TAIL or HEAD

    HINT:
    Duty ratio changes as the illumination becomes darker (the period "A" shown in the illustration becomes longer).


CLOCK ASSEMBLY (w/ Multi-information Display)

HINT:
Measure the voltage with the connector still connected.


E146933E01


Terminal No. (Symbols)
Wiring Color
Terminal Description
Condition
Specified Condition
E11-1 (IG) - Body ground
P - Body ground
Ignition switch signal
Ignition switch off
Below 1 V
Ignition switch on (IG)
11 to 14 V
E11-5 (GND) - Body ground
W-B - Body ground
Ground
Always
Below 1 V
E11-6 (+B) - Body ground
Y - Body ground
Battery
Always
11 to 14 V
E11-9 (CLK) - Body ground
R - Body ground
Multi-information display signal
Ignition switch on (IG)
Pulse generation
E11-10 (DATA) - Body ground
Y - Body ground
Multi-information display signal
Ignition switch on (IG)
Pulse generation
E11-11 (SYNC) - Body ground
L - Body ground
Multi-information display signal
Ignition switch on (IG)
Pulse generation
E11-16 (SGND) - Body ground
BR - Body ground
Ground (Signal Ground)
Always
Always