Home › BODY › SEAT › FRONT SEAT CUSHION HEATER (for Power Seat)

FRONT SEAT CUSHION HEATER (for Power Seat) > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT CUSHION HEATER LH


    B176317E01
  1. Check the seat cushion heater.

    1. Apply battery voltage and check the seat cushion heater.

      OK:
      Measurement Condition
      Condition
      Specified Condition
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 4
      Always
      Seat cushion heater becomes warm

      If the result is not as specified, replace the seat cushion heater.

      NOTICE:
      Immediately after confirming that the seat heater is functioning normally, remove the battery leads. Failing to do so may cause the seat heater to overheat.

  1. Check the thermostat.

    1. Apply battery voltage and check the seat cushion heater.

      OK:
      Measurement Condition
      Condition
      Specified Condition
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 4
      Always
      Seat cushion heater temperature below 54°C (129°F)

      If the result is not as specified, replace the seat cushion heater.

      NOTICE:
      Immediately after confirming that the seat heater is functioning normally, remove the battery leads. Failing to do so may cause the seat heater to overheat.