Home
›
ENGINE
›
2GR-FE ENGINE CONTROL SYSTEM
›
CRANKSHAFT POSITION SENSOR
CRANKSHAFT POSITION SENSOR > INSPECTION
for Preparation
Click here
1. INSPECT CRANKSHAFT POSITION SENSOR
Measure the resistance according to the value(s) in the table below.
Standard resistance:
Temperature
Specified Condition
Cold
1630 to 2740 Ω
Hot
2065 to 3225 Ω
NOTICE:
"Cold" and "Hot" mean the temperature of the coils themselves.
"Cold" is from -10°C (14°F) to 50°C (122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).
If the resistance is not as specified, replace the crankshaft position sensor.