Home › BODY ELECTRICAL › LIGHTING › REAR DOOR COURTESY SWITCH

REAR DOOR COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT REAR DOOR COURTESY SWITCH


  1. Measure the resistance according to the value(s) in the table below.


    E142632E05

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - Switch body
    Not pushed (ON)
    Below 1 Ω
    Pushed (OFF)
    10 kΩ or higher

    If the result is not as specified, replace the switch.