FORWARD CLUTCH > INSPECTION |
| 1. INSPECT PACK CLEARANCE OF FORWARD CLUTCH |
![]() |
Install the forward clutch on the oil pump.
Using a dial indicator, measure the forward clutch pack clearance while applying and releasing compressed air (392 kPa, 4.0 kgf/cm2, 57 psi).
| 2. INSPECT FORWARD MULTIPLE DISC CLUTCH DISC |
![]() |
Check if the sliding surface of the disc, plate, and flange are worn or burnt.
If necessary, replace them.
| 3. INSPECT FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY |
![]() |
Using vernier calipers, measure the free length of the spring together with the spring seat.
| 4. INSPECT PACK CLEARANCE OF FORWARD CLUTCH |
![]() |
Using a dial indicator, measure the forward clutch pack clearance while applying and releasing compressed air (392 kgf/cm2, 4.0 kPa, 57 psi).
| No. | Thickness | No. | Thickness |
| 1 | 3.00 (0.1181) | 4 | 3.45 (0.1358) |
| 2 | 3.15 (0.1240) | 5 | 3.60 (0.1417) |
| 3 | 3.30 (0.1299) | - | - |
| 5. INSPECT FORWARD MULTIPLE DISC CLUTCH DISC |
![]() |
Check if the disc lightly rotates when rotating the forward clutch assembly after inserting the multiple disc clutch into it.