FORWARD CLUTCH > DISASSEMBLY |
| 1. INSPECT PACK CLEARANCE OF FORWARD CLUTCH |
![]() |
Using a dial indicator, measure the forward clutch pack clearance while applying and releasing compressed air (392 kgf/cm2, 4.0 kPa, 57 psi).
| No. | Thickness | No. | Thickness |
| 1 | 3.00 (0.1181) | 4 | 3.45 (0.1358) |
| 2 | 3.15 (0.1240) | 5 | 3.60 (0.1417) |
| 3 | 3.30 (0.1299) | - | - |
| 2. REMOVE FORWARD MULTIPLE DISC CLUTCH DISC |
![]() |
Using a screwdriver, remove the snap ring.
![]() |
Remove the flange, 5 discs, and 5 plates from the input shaft assembly.
| 3. REMOVE FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY |
![]() |
Place SST on the spring retainer and compress the return spring with a press.
Using a snap ring expander, remove the snap ring.
![]() |
Remove the clutch balancer from the input shaft.
![]() |
Remove the forward clutch return spring from the input shaft.
| 4. REMOVE FORWARD CLUTCH PISTON SUB-ASSEMBLY |
![]() |
Place the forward clutch drum onto the oil pump.
Holding the forward clutch piston by hand, apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the oil pump to remove the forward clutch piston.
| 5. REMOVE INPUT SHAFT OIL SEAL RING |
![]() |
Remove the input shaft oil seal ring from the input shaft.