Home › TRANSMISSION ยท U151E AUTOMATIC TRANSAXLE › DIFFERENTIAL CASE

DIFFERENTIAL CASE > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT DIFFERENTIAL RING GEAR


    D026445E08
  1. Place matchmarks on the front differential ring gear and differential case.



    D026446
  1. Remove the 14 bolts.



    C050237
  1. Using a plastic hammer, tap on the front differential ring gear to remove it from the case.



2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING


    D025595E01
  1. Using SST, remove the front differential case front differential tapered roller bearing from the differential case.

    SST
    09950-00020  
    09950-00030  
    09950-60010   (09951-00490)
    09950-40011   (09957-04010)



    D025596E02
  1. Using SST, remove the front differential case front tapered roller bearing outer race.

    SST
    09308-00010  



3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING


    D025597E03
  1. Using SST, remove the front differential case rear tapered roller bearing from the differential case.

    SST
    09950-00020  
    09950-00030  
    09950-60010   (09951-00490)
    09950-40011   (09957-04010)
    09308-00010  



    D025598E01
  1. Using SST, remove the front differential case rear tapered roller bearing outer race.

    SST
    09308-00010  



4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN


    C050240
  1. Using a pin punch and hammer, install the straight pin.

    NOTICE:
    Before removing the straight pin, unstake it with a pin punch.



5. REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT


    C050241E06
  1. Remove the No. 1 front differential pinion shaft from the differential case.



6. REMOVE FRONT DIFFERENTIAL SIDE GEAR


    C050242
  1. Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears and 2 side gear thrust washers from the differential case.



7. REMOVE TRANSAXLE HOUSING OIL SEAL


    D025599E01
  1. Using SST and a hammer, remove the oil seal.

    SST
    09950-70010   (09951-07100)
    09215-00013   (09215-00471)



8. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL


    D025600E01
  1. Using SST, remove the oil seal.

    SST
    09950-70010   (09951-07100)
    09608-10010