Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM (w/o Smart Key System)

ENGINE IMMOBILISER SYSTEM (w/o Smart Key System) > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect Techstream to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. Turn the tester on.

  4. Select the following menu items: Body Electrical / Immobiliser / Trouble Codes.

  5. Check the details of the DTC(s) (Click here).


CLEAR DTC
  1. Connect Techstream to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. Turn the tester on.

  4. Select the following menu items: Body Electrical / Immobiliser / Trouble Codes.

  5. Erase the DTCs.