Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL TRANSMITTER (w/o Smart Key System)

DOOR CONTROL TRANSMITTER (w/o Smart Key System) > REMOVAL

for Preparation Click here



1. REMOVE TRANSMITTER BATTERY

NOTICE:
Special caution should be taken for handling each component as they are precision electronic components.



    B174111
  1. Using a screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.

    NOTICE:
    Do not forcibly pry the cover.



    B174112
  1. Remove the battery (lithium battery).

    NOTICE:
    1. Do not push the terminals with your finger.
    2. Do not forcibly pry up the battery. The terminals may become damaged.
    3. Do not touch the battery with wet hands. Water may cause rust.
    4. Do not touch or move any components inside the transmitter. It may cease to work.