Home › BODY › WINDSHIELD / WINDOWGLASS › WINDSHIELD DEICER RELAY

WINDSHIELD DEICER RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT WINDSHIELD DEICER RELAY (Marking: DEICER)


    B060778E04
  1. Measure the resistance of the relay. Measure the resistance according to the value(s) in the table below.
    Standard resistance 
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    Voltage is not applied between terminals 1 and 2
    10 kΩ or higher
    3 - 5
    Apply battery voltage between terminals 1 and 2
    Below 1 Ω
    If the result is not as specified, replace the relay.