DTC B2311 Driver Door Motor Malfunction |
| DTC Code | DTC Detection Condition | Trouble Area |
| B2311 | When either condition below is met:
|
|
| 1.INITIALIZE POWER WINDOW CONTROL SYSTEM |
Initialize the power window regulator motor assembly (on the driver side) (Click here).
Check that the power window operates normally by opening and closing the window.
|
| ||||
| OK | |
| 2.CHECK WHETHER PARTS HAVE BEEN INSTALLED CORRECTLY |
Check that the power window components (on the driver side) are installed correctly.
|
| ||||
| OK | |
| 3.CHECK DTC OUTPUT |
Turn the ignition switch off.
Wait for at least 10 seconds, and then turn the ignition switch on (IG).
Check whether the DTC output recurs.
| Display (DTC Output) | Proceed to |
| B2311 | A |
| No output | B |
|
| ||||
| B | ||
| ||