AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) > LIN Communication Circuit |

| 1.CHECK AIR CONDITIONING SYSTEM (OPERATION) |
| Result | Proceed to |
| Front air conditioning control malfunctions | A |
| Rear air conditioning control malfunctions | B |
|
| ||||
| A | |
| 2.CHECK HARNESS AND CONNECTOR (A/C CONTROL ASSEMBLY - AIR CONDITIONING AMPLIFIER) |
![]() |
Disconnect the connector from the air conditioning control assembly.
Disconnect the connector from the air conditioning amplifier.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| D37-37 (LIN1) - E10-5 (LIN1) | Always | Below 1 Ω |
| D37-37 (LIN1) - Body ground | Always | 10 kΩ or higher |
|
| ||||
| OK | ||
| ||
| 3.CHECK HARNESS AND CONNECTOR (REAR A/C CONTROL ASSEMBLY - AIR CONDITIONING AMPLIFIER) |
![]() |
Disconnect the connector from the rear air conditioning control assembly.
Disconnect the connector from the air conditioning amplifier.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| D38-13 (RLIN) - R1-5 (MPX-) | Always | Below 1 Ω |
| D38-13 (RLIN) - Body ground | Always | 10 kΩ or higher |
|
| ||||
| OK | ||
| ||