DOOR CONTROL SWITCH > REMOVAL |
| 1. REMOVE FRONT ARMREST UPPER BASE PANEL |
![]() |
Using a screwdriver with the tip wrapped with protective tape, disengage the 7 claws and clip, and remove the front armrest upper base panel.
Disconnect the connector.
| 2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side) |
![]() |
Remove the 3 screws and the power window regulator master switch assembly.
| 3. REMOVE DOOR CONTROL SWITCH ASSEMBLY (for Front Passenger Side) |
![]() |
Disengage the 2 claws and remove the door control switch assembly.