Home › STEERING › STEERING COLUMN › STEERING LOCK SYSTEM

STEERING LOCK SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect Techstream to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the tester on.

  4. Enter the following menus:

    1. Select: Body Electrical / Smart Access / Trouble Codes /

  5. Read the DTCs.


CLEAR DTC
  1. Connect Techstream to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the tester on.

  4. Enter the following menus:

    1. Select: Body Electrical / Smart Access / Trouble Codes /

  5. Erase the DTCs.