Home › TRANSMISSION ยท U151F AUTOMATIC TRANSAXLE › SHIFT LEVER

SHIFT LEVER > ADJUSTMENT

for Preparation Click here



1. ADJUST SHIFT LEVER POSITION


    C135725E04
  1. Move the shift lever to N.

  1. Slide the slider in the direction shown in the illustration and pull out the lock piece.

  1. Push the lock piece into the adjuster case.

    NOTICE:
    Firmly push in the lock piece until the slider locks.

  1. After adjusting the shift lever position, check the operation and function of the shift lever. If there is a problem, adjust the position again.