SHIFT LEVER > DISASSEMBLY |
| 1. REMOVE POSITION INDICATOR HOUSING ASSEMBLY |
![]() |
Separate the connector and 2 wire harness clamps from the shift lock control unit.
![]() |
Using a screwdriver, release the stopper.
Using a screwdriver, disengage the locking lug of terminals 4 and 8, and pull the terminals out from the rear of the connector.
![]() |
Separate the wire harness clamp from the shift lock control unit.
Disengage the 4 claws and remove the position indicator housing from the shift lock control unit.
| 2. REMOVE POSITION INDICATOR HOUSING LOWER |
![]() |
Disengage the 4 claws and remove the position indicator housing lower from the position indicator housing.
| 3. REMOVE SHIFT LEVER CAP |
Using a screwdriver, remove the shift lever cap from the position indicator housing.
| 4. REMOVE POSITION INDICATOR LIGHT GUIDE |
![]() |
Disengage the 4 claws and remove the position indicator light guide from the position indicator housing lower.
| 5. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY |
![]() |
Remove the indicator light wire sub-assembly from the position indictor light guide.
| 6. REMOVE POSITION INDICATOR LIGHT BULB |
Remove the bulb and cap from the indicator light wire socket.
| 7. REMOVE POSITION INDICATOR SLIDE COVER |
![]() |
Remove the position indicator slide cover from the position indicator housing lower.
| 8. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER |
![]() |
Remove the position indicator slide cover from the No. 2 position indicator slide cover.