SHIFT LEVER > REASSEMBLY |
| 1. INSTALL NO. 2 POSITION INDICATOR SLIDE COVER |
![]() |
Install the position indicator slide cover to the No. 2 position indicator slide cover.
| 2. INSTALL POSITION INDICATOR SLIDE COVER |
![]() |
Install the position indicator slide cover to the position indicator housing lower.
| 3. INSTALL POSITION INDICATOR HOUSING LOWER |
![]() |
Engage the 4 claws and install the position indicator housing lower to the position indicator housing.
| 4. INSTALL POSITION INDICATOR LIGHT GUIDE |
![]() |
Engage the 4 claws and install the position indicator light guide to the position indicator housing lower.
| 5. INSTALL POSITION INDICATOR LIGHT BULB |
Install the cap to the bulb.
install the bulb to the position indicator light wire socket.
| 6. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY |
![]() |
Install the indicator light wire sub-assembly to the position indicator light guide.
| 7. INSTALL SHIFT LEVER CAP |
Install the shift lever cap to the position indicator housing.
| 8. INSTALL POSITION INDICATOR HOUSING ASSEMBLY |
![]() |
Engage the 4 claws and install the position indicator housing to the shift lever assembly.
Connect the wire harness clamp to the shift lock control unit.
![]() |
Connect terminals 4 and 8 of the indicator light wire.
Push the stopper.
![]() |
Connect the connector and 2 wire harness clamps to the shift lock control unit.