Home › TRANSMISSION ยท U151E AUTOMATIC TRANSAXLE › AIR COOLED OIL COOLER

AIR COOLED OIL COOLER > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER ASSEMBLY

HINT:
(Click here)



2. DRAIN AUTOMATIC TRANSAXLE FLUID
  1. Remove the drain plug and the gasket, and drain ATF.

  1. Install a new gasket and the drain plug.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }



3. REMOVE OIL WITH HOSE COOLER ASSEMBLY


    C167672
  1. Remove the 2 hose clamps and disconnect the 2 oil cooler hoses.

  1. Remove the bolt, nut, and the oil with hose cooler assembly.