Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

DTC    44-46    Disc Crack

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
44-46
Scratches or dirt is found on disc surface or disc is set upside down.
  1. DVD or CD
  2. Television display assembly

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK THAT DISC IS INSERTED PROPERLY
  1. Check whether or not the disc is inserted upside down.

    OK:
    Disc is properly inserted.



NG
SET DISC
OK


2.DISC CLEANING


    I100151
  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it with a soft cloth from inside to outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or antistatic preservative.


NEXT


3.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc.



NG
DISC IS FAULTY
OK


4.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with another and recheck.

    1. Replace the disc with a normal one.

    2. Clear the DTC (Click here).

    3. Recheck DTCs and check if the same trouble occurs again.

      OK:
      Malfunction disappears.



NG
REPLACE TELEVISION DISPLAY ASSEMBLY
OK

END