DOOR MIRROR FOOT LIGHT RELAY > ON-VEHICLE INSPECTION |
| 1. INSPECT DOOR MIRROR FOOT LIGHT RELAY |
![]() |
Remove the door mirror foot light relay from the No. 2 engine room relay block.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 3 - 5 | Voltage is not applied between terminals 1 and 2 | 10 kΩ or higher |
| 3 - 5 | Apply battery voltage between terminals 1 and 2 | Below 1 Ω |