DTC B1441/41 Air Mix Damper Control Servo Motor Circuit (Passenger Side) |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1441/41 | Air mix damper position does not change even if air conditioning amplifier operates air mix control servo motor |
|

| 1.READ VALUE USING TECHSTREAM |
Connect Techstream to the DLC3.
Turn the ignition switch on (IG) and turn Techstream main switch ON.
Select the items below in the Data List, and read the value displayed on Techstream.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Air Mix Sensor Targ Pulse(P) | Passenger side air mix control servo motor target pulse / Min.: 0, Max.: 255 | MAX. COLD: 105 (pulse) MAX. COLD: 7 (pulse) | - |
| Result | Proceed to |
| NG | A |
| OK (Checking from PROBLEM SYMPTOMS TABLE) | B |
| OK (Checking from DTC) | C |
|
| ||||
|
| ||||
| A | |
| 2.REPLACE AIR MIX CONTROL SERVO MOTOR |
Replace the air mix control servo motor .
| NEXT | |
| 3.CHECK DTC OUTPUT |
Clear the DTC (Click here).
Check for DTC (Click here).
|
| ||||
| OK | ||
| ||