FRONT DOOR LOCK > INSPECTION |
| 1. INSPECT FRONT DOOR LOCK ASSEMBLY (for Driver Side) |
![]() |
Apply the battery voltage to the motor terminals and check the operation of the door lock motor.
| Measurement Condition | Specified Condition |
| Battery positive (+) → 4 (L) Battery negative (-) → 1 (UL) | Locked |
| Battery positive (+) → 1 (UL) Battery negative (-) → 4 (L) | Unlocked |
Measure the resistance of the door lock position switch.
| Tester Connection | Measurement Condition | Door Lock Condition | Specified Condition |
| 7 - 8 | Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1 | Locked | 10 kΩ or higher |
| 7 - 8 | Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 | Unlocked | Below 1 Ω |
![]() |
Measure the resistance of the door key lock and unlock switch operation.
| Tester Connection | Condition | Specified Condition |
| 7 - 9 | Locked | Below 1 Ω |
| 7 - 9 7 - 10 | OFF (Free) | 10 kΩ or higher |
| 7 - 10 | Unlocked | Below 1 Ω |
| 2. INSPECT FRONT DOOR LOCK ASSEMBLY (for Front Passenger Side) |
![]() |
Apply the battery voltage to the motor terminals and check the operation of the door lock motor.
| Measurement Condition | Specified Condition |
| Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1 | Locked |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 | Unlocked |
Measure the resistance of the door lock position switch.
| Tester Connection | Measurement Condition | Door Lock Condition | Specified Condition |
| 7 - 8 | Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1 | Locked | 10 kΩ or higher |
| 7 - 8 | Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 | Unlocked | Below 1Ω |