Home › BODY › SEAT › SEAT VARIABLE CUSHION SWITCH

SEAT VARIABLE CUSHION SWITCH > INSPECTION

for Preparation Click here



1. INSPECT SEAT VARIABLE CUSHION SWITCH


    B176312E01
  1. Inspect the seat variable cushion switch.

    1. Measure the resistance between the terminals when the switch is operated.

      Standard resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      b7-4 (E) - b7-5 (CSNF)
      FRONT
      Below 1 Ω
      b7-2 (B) - b7-3 (CSNR)
      FRONT
      Below 1 Ω
      b7-4 (E) - b7-3 (CSNR)
      FRONT
      10 kΩ or higher
      b7-2 (B) - b7-5 (CSNF)
      FRONT
      10 kΩ or higher
      b7-4 (E) - b7-5 (CSNF)
      OFF
      Below 1 Ω
      b7-1 (E) - b7-3 (CSNR)
      OFF
      Below 1 Ω
      b7-4 (E) - b7-3 (CSNR)
      OFF
      10 kΩ or higher
      b7-1 (E) - b7-5 (CSNF)
      OFF
      10 kΩ or higher
      b7-1 (E) - b7-3 (CSNR)
      REAR
      Below 1 Ω
      b7-2 (B) - b7-5 (CSNF)
      REAR
      Below 1 Ω
      b7-1 (E) - b7-5 (CSNF)
      REAR
      10 kΩ or higher
      b7-2 (B) - b7-3 (CSNR)
      REAR
      10 kΩ or higher

      If the result is not as specified, replace the seat variable cushion switch.