Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

DTC    44-78    DSP Error

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
44-78
An error occurs during the decode process (MP3/WMA).
Television display assembly

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

NOTICE:
  1. This code may be output even if there is no malfunction.
  2. If this code is output frequently, replace the television display assembly.

1.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


2.RECHECK FOR DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    The same trouble does not occur.



NG
REPLACE TELEVISION DISPLAY ASSEMBLY (Click here)
OK

END