Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY


    E151030
  1. Disengage the 4 claws and remove the No. 1 air duct sub-assembly.



2. REMOVE AIR FILTER CASE


    E151031
  1. Disengage the 2 claws and remove the air filter case.



3. REMOVE CLEAN AIR FILTER


    E151033
  1. Remove the clean air filter as shown in the illustration.



4. REMOVE AIR INLET SERVO MOTOR SUB-ASSEMBLY


    E151034
  1. Remove the 3 screws and air inlet servo motor sub-assembly.



5. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY


    E151035
  1. Remove the 3 screws and front blower motor sub-assembly.