2GR-FE COOLING > SERVICE DATA |
| Condition | Specified Condition |
| Standard valve opening temperature | 80 to 84°C (176 to 183°F) |
| Standard valve lift | 10 mm (0.39 in.) or more at 95°C (203°F) |
| Item | Condition | Specified Condition |
| No. 1 cooling fan motor | 12 V | 6.8 to 9.8 A |
| No. 2 cooling fan motor | 12 V | 6.8 to 9.8 A |
| Item | Condition | Specified Condition |
| No. 1 cooling fan motor | 12 V | 14.6 to 18.7 A |
| No. 2 cooling fan motor | 12 V | 14.6 to 18.7 A |
| Item | Condition | Specified Condition |
| Cooling fan ECU | Ignition switch on (IG) | 11 to 14 V |
| Item | Tester Connection | Specified Condition |
| Fan main relay | 3 - 5 | 10 kΩor higher (battery volltage is not applied between terminals 1 and 2) |
| 3 - 5 | Below 1 Ω (apply battery voltage between terminals 1 and 2) |
| Item | Condition | Specified Condition |
| Radiator cap | Standard value (for brand-new cap) | 93.3 to 122.7 kPa (0.95 to 1.25 kgf/cm2, 13.5 to 17.8 psi) |
| Minimum standard value (for used cap) | 78.5 kPa (0.8 kgf/cm2, 11.4 psi) |