POWER BACK DOOR OPENER / CLOSER SWITCH > INSPECTION |
| 1. INSPECT POWER BACK DOOR OPENER / CLOSER SWITCH |
![]() |
Measure the resistance of the switch.
| Tester Connection | Switch Condition | Specified Condition |
| 4 - 1 | Pushed (ON) | Below 1 Ω |
| 4 - 1 | Free (OFF) | 10 kΩ or higher |
Check that the switch illuminates.
| Measurement Condition | Specified Condition |
| Battery positive (+) → 3 (ILL+) Battery negative (-) → 2 (ILL-) | Illuminates |