Home › BRAKE › BRAKE › BRAKE PEDAL

BRAKE PEDAL > REASSEMBLY

for Preparation Click here



1. INSTALL BRAKE PEDAL PAD
  1. Install the brake pedal pad.



2. INSTALL BRAKE PEDAL BUSHING
  1. Apply lithium soap base glycol grease to 2 new brake pedal bushings.

  1. Install the 2 brake pedal bushings to the brake pedal sub-assembly.



3. INSTALL BRAKE PEDAL SHAFT COLLAR
  1. Install the brake pedal shaft collar to the brake pedal sub-assembly.



4. INSTALL BRAKE PEDAL SUB-ASSEMBLY


    C170589
  1. Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the bolt and nut as shown in the illustration.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }



    C165379
  1. Engage the 2 clamps.