LIN COMMUNICATION SYSTEM > DTC CHECK / CLEAR |
| CHECK DTC |
Turn the ignition switch off.
Connect Techstream to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Select the following menus: Body Electrical / Trouble Codes.
Check for DTCs.
| CLEAR DTC |
Turn the ignition switch off.
Connect Techstream to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Select the following menus: Body Electrical / Trouble Codes.
Erase the DTCs by pressing the YES button on the tester.