REAR WIPER MOTOR > INSPECTION |
| 1. INSPECT REAR WIPER MOTOR ASSEMBLY |
![]() |
Check the wiper operation.
Connect the battery's positive (+) lead to terminal 4 (+B), and the negative (-) lead to terminal 3 (LS) and terminal 5 (E), and check that the motor operates.
Check the INT operation.
Connect the battery's positive (+) lead to terminal 4 (+B), and the negative (-) lead to terminal 2 (C1) and terminal 5 (E), and check that the motor operates.
Check the automatic stop operation.
Put the matchmark on the windshield wiper motor assembly.
Connect the battery's positive (+) lead to terminal 4 (+B), and the negative (-) lead to terminal 3 (LS) and terminal 5 (E). With the motor rotating, disconnect terminal 3 (LS) to stop the wiper motor operation at any position other than the matchmark.
Check that the motor stops automatically at the matchmark.
