Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › CONDENSER

CONDENSER > REASSEMBLY

for Preparation Click here



1. INSTALL COOLER DRYER


    E150343
  1. Using pliers, install the cooler dryer to the modulator.



    E101932
  1. Apply sufficient compressor oil to an O-ring and the cap fitting surface.

    Compressor oil:
    ND-OIL 8 or equivalent



    E150344E01
  1. Using a 14 mm straight hexagon wrench, install the cap to the cooler condenser core.

    Torque:
    2.9 N*m{ 30 kgf*cm , 26 in.*lbf }