SUSPENSION > SERVICE DATA |
| Model | Front A - B | Rear C - D |
| 2WD | 118.2 mm (4.65 in.) | 34.9 mm (1.37 in.) |
| 4WD | 118.3 mm (4.66 in.) | 33.8 mm (1.33 in.) |
| Model | Inside Wheel | Outside Wheel Reference | |
| Front wheel alignment | 2WD | 35°07' +/- 2° (35.12° +/- 2°) | 31°20' (31.33°) |
| 4WD | 35°07' +/- 2° (35.12° +/- 2°) | 31°20' (31.33°) |
| Item | Specified Condition | |
| Front wheel alignment | Toe-in (total) | C + D: 0°02' +/- 12' (0.04° +/- 0.2°) B - A: 0.9 +/- 2 mm (0.04 +/- 0.08 in.) |
| Model | Camber Inclination | Right-left difference | |
| Front wheel alignment | 2WD | -0°38' +/- 45' (-0.63° +/- 0.75°) | 45' (0.75°) or less |
| 4WD | -0°38' +/- 45' (-0.63° +/- 0.75°) |
| Model | Caster Inclination | Right-left difference | |
| Front wheel alignment | 2WD | 2°37' +/- 45' (2.62° +/- 0.75°) | 45' (0.75°) or less |
| 4WD | 2°37' +/- 45' (2.62° +/- 0.75°) |
| Model | Steering Axis Inclination | Right-left difference | |
| Front wheel alignment | 2WD | 11°01' +/- 45' (11.02° +/- 0.75°) | 45' (0.75°) or less |
| 4WD | 11°01' +/- 45' (11.02° +/- 0.75°) |
| Turning torque | |
| Front lower ball joint turning torque | 0.7 to 4.5 N*m (7 to 46 kgf*cm, 6.2 to 40 in.*lbf) |
| Front stabilizer link ball joint turning torque | 0.05 to 1.96 N*m (0.5 to 20 kgf*cm, 0.4 to 17 in.*lbf) |
| Model | Item | Specified Condition | |
| Rear wheel alignment | 2WD | Toe-in (total) | C + D: 0°10' +/- 0°12' (0.17° +/- 0.2°) B - A: 3.0 +/- 2.0 mm (0.12 +/- 0.08 in.) |
| 4WD | Toe-in (total) | C + D: 0°08' +/- 0°12' (0.14° +/- 0.2°) B - A: 3.0 +/- 2.0 mm (0.12 +/- 0.08 in.) |
| Model | Specified Condition | Right-left difference | |
| Rear wheel alignment | 2WD | -1°00' +/- 45' (- 1.00° +/- 0.75°) | 45' (0.75°) or less |
| 4WD | -0°36' +/- 45' (- 0.60° +/- 0.75°) |
| Turning torque | |
| Rear stabilizer link ball joint turning torque | 1.0 N*m (10 kgf*cm, 8.9 in.*lbf) or less |