INTEGRATION RELAY > INSTALLATION |
| 1. INSTALL ENGINE ROOM JUNCTION BLOCK ASSEMBLY |
![]() |
Connect the 4 connectors.
Attach the engine room junction block assembly.
| 2. INSTALL NO. 1 RELAY BLOCK COVER |
![]() |
Install the No. 1 relay block cover.
| 3. INSTALL RESERVOIR BRACKET |
![]() |
Install the reservoir bracket with the 2 bolts.
| 4. INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY |
![]() |
Install the brake master cylinder reservoir assembly with the bolt.
Connect the level warning switch connector.