Home › STEERING › STEERING COLUMN › STEERING WHEEL

STEERING WHEEL > DISASSEMBLY

for Preparation Click here



1. REMOVE CRUISE CONTROL MAIN SWITCH


    E150160
  1. Remove the 2 screws.

  1. Disconnect the connector.



    E150161
  1. Remove the cruise control main switch as shown in the illustration.



2. REMOVE NO. 2 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch)


    C165710
  1. Remove the screw.



    C165711
  1. Disengage the 2 pins to remove the No. 2 steering wheel ornament from the steering wheel spoke sub-assembly.



3. REMOVE NO. 1 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch)

HINT:
Perform the same procedure as for the No. 2 steering wheel ornament.



4. REMOVE STEERING PAD SWITCH LH (w/o Microphone)


    E173905
  1. Disconnect the steering pad switch connector from the spiral cable.

  1. Remove the screw.

  1. Disengage the 2 pins and remove the steering pad switch LH.



5. REMOVE NO. 1 STEERING WHEEL ORNAMENT (w/o Microphone)

HINT:
Perform the same procedure as for the No. 2 steering wheel ornament.



6. REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Microphone)


    E150585
  1. Disconnect the steering pad switch connector from the spiral cable.

  1. Remove the screw.

  1. Disengage the 2 pins and remove the steering pad switch.



    E150586
  1. Remove the screw.

  1. Disengage the 2 pins and remove the steering pad switch assembly.



7. REMOVE LOWER STEERING WHEEL BOSS COVER


    C165712
  1. Remove the 2 screws.



    C165713
  1. Disengage the 4 claws to remove the lower steering wheel boss cover from the steering wheel spoke sub-assembly.



8. REMOVE STEERING PAD ATTACHING SCREW


    C165714
  1. Remove the 2 steering pad attaching screws from the lower steering wheel boss cover.