Home › BODY › EXTERIOR › FRONT BUMPER

FRONT BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL FRONT BUMPER STAY LH


    B172769E01
  1. Engage the 2 claws and install the front bumper stay LH.

  1. Install the bolt and screw.

    Torque:
    Bolt:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
    Screw:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }



2. INSTALL FRONT BUMPER STAY RH

HINT:
Use the same procedures for the RH side and LH side.



3. INSTALL FRONT BUMPER REINFORCEMENT


    B172768
  1. Install the front bumper reinforcement with the 6 bolts.

    Torque:
    64 N*m{ 653 kgf*cm , 47 ft.*lbf }



4. INSTALL FRONT BUMPER ENERGY ABSORBER


    B172767
  1. Engage the 2 guides and install the front bumper energy absorber.



5. INSTALL FRONT BUMPER HOLE COVER LH


    B172766
  1. Engage the 2 claws and install the front bumper hole cover LH.



6. INSTALL FRONT BUMPER HOLE COVER RH

HINT:
Use the same procedure for the RH side and LH side.



7. INSTALL FOG LIGHT COVER LH


    B172765
  1. Engage the 6 claws and install the fog light cover LH.



8. INSTALL FOG LIGHT COVER RH

HINT:
Use the same procedure for the RH side and LH side.



9. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)


    E150050
  1. Engage the guide.

  1. Install the fog light assembly with the 2 screws.



10. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:
Use the same procedure for the RH side and LH side.