REAR BUMPER > REASSEMBLY |
| 1. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT |
![]() |
Engage the 2 claws and install a new No. 1 rear bumper side support.
| 2. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH |
![]() |
Engage the 3 claws and install a new No. 2 rear bumper side support LH.
Install the 2 screws.
| 3. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH |
| 4. INSTALL REAR BUMPER SIDE RETAINER LH |
![]() |
Engage the 2 claws and install a new rear bumper side retainer LH.
Install the screw.
| 5. INSTALL REAR BUMPER SIDE RETAINER RH |
| 6. INSTALL REAR BUMPER REINFORCEMENT |
![]() |
Install the rear bumper reinforcement with the 6 nuts.
| 7. INSTALL REAR BUMPER PLATE LH |
![]() |
Engage the 3 claws and install the rear bumper plate LH.
| 8. INSTALL REAR BUMPER PLATE RH |
| 9. INSTALL REAR BUMPER BAR |
![]() |
Install the rear bumper bar on the rear bumper energy absorber.
| 10. INSTALL REAR BUMPER ENERGY ABSORBER |
![]() |
Engage the 2 guides and install the rear bumper energy absorber.
| 11. INSTALL LOWER REAR BUMPER COVER |
Engage the 10 claws and 2 guides, and install the lower rear bumper cover.
Install the 2 clips.

| 12. INSTALL REFLEX REFLECTOR ASSEMBLY LH |
![]() |
Install the reflex reflector assembly LH with the nut.
| 13. INSTALL REFLEX REFLECTOR ASSEMBLY RH |