Home › BODY › EXTERIOR › RADIATOR GRILLE

RADIATOR GRILLE > INSTALLATION

for Preparation Click here



1. INSTALL LOWER RADIATOR GRILLE MOULDING LH (w/ Plated Moulding)


    B172756
  1. Engage the 4 claws and install the lower radiator grille moulding LH.



2. INSTALL LOWER RADIATOR GRILLE MOULDING RH (w/ Plated Moulding)

HINT:
Use the same procedure for the RH side and LH side.



3. INSTALL CENTER RADIATOR GRILLE MOULDING LH (w/ Plated Moulding)


    B172755
  1. Engage the 4 claws and install the center radiator grille moulding LH.



4. INSTALL CENTER RADIATOR GRILLE MOULDING RH (w/ Plated Moulding)

HINT:
Use the same procedure for the RH side and LH side.



5. INSTALL UPPER RADIATOR GRILLE MOULDING LH (w/ Plated Moulding)


    B172754
  1. Engage the 4 claws and install the upper radiator grille moulding LH.



6. INSTALL UPPER RADIATOR GRILLE MOULDING RH (w/ Plated Moulding)

HINT:
Use the same procedure for the RH side and LH side.



7. INSTALL INSIDE RADIATOR GRILLE (w/ Plated Moulding)


    B172753
  1. Engage the 9 claws and install the inside radiator grille.



    B172752
  1. Install the 7 screws.



8. INSTALL RADIATOR GRILLE EMBLEM


    B172750
  1. Engage the 3 claws and install the radiator grille emblem.



9. INSTALL RADIATOR GRILLE


    B172748
  1. Engage the 4 guides and 6 claws, and install the radiator grille.



    B172746
  1. Install the 4 clips and 2 bolts.



10. INSTALL COOL AIR INTAKE DUCT SEAL


    B172745
  1. Install the cool air intake duct seal with the 11 clips.