Home › BODY › EXTERIOR › RADIATOR GRILLE

RADIATOR GRILLE > REMOVAL

for Preparation Click here



1. REMOVE COOL AIR INTAKE DUCT SEAL


    B172745
  1. Remove the 11 clips and cool air intake duct seal.



2. REMOVE RADIATOR GRILLE


    B172749E01
  1. Put protective tape around the radiator grille.



    B172746
  1. Remove the 2 bolts and 4 clips.



    B172747
  1. Disengage the 6 claws and 4 guides, and remove the radiator grille.



3. REMOVE RADIATOR GRILLE EMBLEM


    B172750
  1. Disengage the 3 claws and remove the radiator grille emblem.



4. REMOVE INSIDE RADIATOR GRILLE (w/ Plated Moulding)


    B172752
  1. Remove the 7 screws.



    B172753
  1. Disengage the 9 claws and remove the inside radiator grille.



5. REMOVE UPPER RADIATOR GRILLE MOULDING LH (w/ Plated Moulding)


    B172754
  1. Disengage the 4 claws and remove the upper radiator grille moulding LH.



6. REMOVE UPPER RADIATOR GRILLE MOULDING RH (w/ Plated Moulding)

HINT:
Use the same procedure for the RH side and LH side.



7. REMOVE CENTER RADIATOR GRILLE MOULDING LH (w/ Plated Moulding)


    B172755
  1. Disengage the 4 claws and remove the center radiator grille moulding LH.



8. REMOVE CENTER RADIATOR GRILLE MOULDING RH (w/ Plated Moulding)

HINT:
Use the same procedure for the RH side and LH side.



9. REMOVE LOWER RADIATOR GRILLE MOULDING LH (w/ Plated Moulding)


    B172756
  1. Disengage the 4 claws and remove the lower radiator grille moulding LH.



10. REMOVE LOWER RADIATOR GRILLE MOULDING RH (w/ Plated Moulding)

HINT:
Use the same procedure for the RH side and LH side.