Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER SWITCH

WIPER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE STEERING COLUMN COVER


    E151100
  1. Turn the steering wheel assembly to the right and remove the screw as shown in the illustration.



    E151101
  1. Turn the steering wheel assembly to the left and remove the screw as shown in the illustration.



    E151095
  1. Disengage the 2 claws and remove the lower steering column cover.



    E151094
  1. Disengage the claw and remove the upper steering column cover.



2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    E151096
  1. Disconnect the 2 connectors.

  1. Disengage the claw and remove the windshield wiper switch assembly.

    NOTICE:
    If the claw is pushed with excessive force, it may break.