WASHER NOZZLE > ADJUSTMENT |
| 1. REMOVE WASHER NOZZLE SUB-ASSEMBLY |
![]() |
Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.
![]() |
Remove the washer nozzle sub-assembly from the washer hose.
| 2. ADJUST WASHER NOZZLE SUB-ASSEMBLY |
Select a washer nozzle sub-assembly so that the washer fluid spray area is as specitied.

| 3. INSTALL WASHER NOZZLE SUB-ASSEMBLY |
![]() |
Connect a new washer nozzle sub-assembly to the washer hose.
![]() |
Engage the 2 claws and install the washer nozzle sub-assembly as shown in the illustration.