WASHER NOZZLE > ON-VEHICLE INSPECTION |
| 1. INSPECT FRONT WASHER NOZZLE SUB-ASSEMBLY |
With the engine running, check the positions that the washer fluid hits the windshield.

| Area | Dimension |
| A | 353 mm (13.88 in.) |
| B | 143 mm (5.70 in.) |
| C | 193 mm (7.61 in.) |
| 2. INSPECT REAR WASHER NOZZLE SUB-ASSEMBLY |
With the engine running, check the position that the washer fluid hits the windshield.

| Area | Dimension | Area | Dimension |
| A | 265 mm (10.44 in.) | E | 252 mm (9.92 in.) |
| B | 197 mm (7.77 in.) | F | 178 mm (7.00 in.) |
| C | 0.4 mm (0.01 in.) | G | 25 mm (0.98 in.) |
| D | 109 mm (4.27 in.) | H | 139 mm (5.46 in.) |