FOG LIGHT ASSEMBLY > REMOVAL |
| 1. REMOVE COOL AIR INTAKE DUCT SEAL |
![]() |
Remove the 11 clips and cool air intake duct seal.
| 2. REMOVE RADIATOR GRILLE |
![]() |
Put protective tape around the radiator grille.
![]() |
Remove the 2 bolts and 4 clips.
![]() |
Disengage the 6 claws and 4 guides, and remove the radiator grille.
| 3. REMOVE FRONT BUMPER ASSEMBLY |
![]() |
Put protective tape around the front bumper assembly.
![]() |
Remove the screw.
Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.
![]() |
Remove the 7 screws and clip.
![]() |
Disengage the 4 claws and disconnect the front bumper assembly.
Disconnect each fog light connector, and then remove the front bumper assembly.
| 4. REMOVE FOG LIGHT ASSEMBLY |
![]() |
Remove the 2 screws.
Disengage the guide and remove the fog light assembly.